NZ26 Wood Burning Fireplace

 

The link to this product information on the manufacturer’s web site is at the bottom of this page. 

  • Air control chamber that eliminates negative pressure problems
  • Uses outside or inside air for combustion
  • Full brick patterned refractory liner retains heat and supports overnight burn
  • Exclusive PHAZER™ light weight ceramic baffle heats up quickly to help increase efficiency
  • Four stainless steel secondary air tubes that create fascinating display of YELLOW DANCING FLAMES®
  • Convenient and elegant, stainless steel log retainer and primary "bottom air feed" assists in cold start up and to "recharge" a small dying fire
  • Air wash system insulated with ceramic fibre and protected with stainless steel cover plate eliminates deterioration and assures complete combustion, maintaining an extremely clean viewing glass
  • Large "King Size" capacity ash pan (600 cu. in. capacity) with unique tri-fold lid and dual carrying handles
  • Easy, single lever combustion control with optional motorized thermostat allows for automatic regulation of the burn rate
  • Firebox aerodynamics allow you to open the door without drawing smoke into the room
  • Heat radiating high temperature ceramic glass
  • Variable speed switch and heat sensor for blower are factory per-installed ready to accept optional blower kit
  • President's Limited Lifetime Warranty

Specifications

NZ26

Heat Output*

11,500 - 27,400 BTU

Heat Output 
(high burn)**

70,000 BTU

Firebox Capacity (cu. ft.)

1.7

Area Heated (sq. ft.)

2,000

Burn Time

9 hours

Max log size

18"

Emissions
(grams per hour)

5.4

Flue Diameter

6"

Outside Combustion Air

yes

Mobile Home Approved

yes (USA only)

Central Heating and/or Blower

Optional

Door size

27 7/8W x 19 1/2H

Weight without bricks

262 LBS

Weight of bricks

132 LBS

  • *EPA rated BTU/h with softwood test fuel (for emissions only ) - no refueling
  • **Wolf Steel Ltd own test showing realistic BTU using hardwood logs with regular refueling. Heat output will differ depending on chimney draft as well as type, moisture content and size of wood.
  • BTU figures may vary with individual conditions
  • The optional central heating blower and thermostatic control may be installed into it's own forced air duct work system

Safety tested and listed to Standards in Canada and the United States: ULC S610-M87, ULC S627, UL 127 for zero clearance fireplaces and to S639-M87 for solid fuel burning masonry fireplaces

 

 

 


Call for Price

  • Manufactured by: Napoleon






Copyright © 2003-2012 Kidd Fireplace and Spa. Template Designed by SageFish.com. Powered by Zen Cart
National Fireplace Institute